Rocker: viewed from the side of the canoe, rocker is the amount of curve in the hull, much like the curve of a banana. a straight keeled canoe, with no rocker, is meant for covering long distances in a straight line. the full length of the hull is in the water, so it tracks well and has good speed.. Http://www.oldtowncanoe.com - professional guide and canoeist denny lange gives us some great info regarding canoe shapes and designs.. Interested in other perspectives regarding ‘negative rocker’ in canoe hull design. having narrowed my search for an ultralight 12 foot canoe with a hung seat (do not enjoy sitting on the floor), i was informed by builder that one design embraced a slightly negative rocker to assist tracking in the relatively short 12 foot hull..
Canoe shapes & designs hull shape, sides & rocker explained. this is an explanation video which explains the advantages of each hole shape. to get yours today, follow the link provided below:. Lake and touring canoes should have conservative amounts of rocker to increase hull speed. it is not critical for river hulls to be fast but it is important that they have rocker for maneuverability (5 – 6" is good for a 16-foot whitewater canoe).touring and expedition canoes should have some rocker as well (2" is good for a l6- or l7-foot. Entry line canoes designed with a sharp entry lines will move with efficiency and speed. straight line canoes haves no rocker. symmetry canoes are design to be either symmetrical–having identical halves with the widest point being at the center. or asymmetrical–with a longer narrower bow and a shorter..
No comments:
Post a Comment